View Mode
Getting Started
Getting Started
1)
Current data is shown on top/right corner with date, time,
and memory usage. (To learn how to
adjust time click here)
(Note: When all the memory is used, the program will automatically write over the earliest recorded data)
2)
CAMERA
Indicate a camera that is on the display
screen.
Indicates a camera that is connected but
not displayed on screen.
Indicates a channel that is not
connected to the system.
Toggle between 1-16 channels to 17-32
channels.
3)
CONTROL
Indicates Digital Output Control is ON.
Indicates Digital Output Control is OFF.
4)
SENSOR
Indicates the Sensor has been triggered.
Indicates the Sensor has not been
triggered.
5)
Change Partitions and the number of camera channels viewed
(from 1 up to 16) with 
.
(Note: Double click on Display screen to change from multi screen to single screen. Right click on Display screen to switch to/from Full Screen)
6)
Click ON to automatically rotate camera
channels on display screen. (To
learn how to set rotation time click here)
7)
To access Menu, click 
.
8)
Enter ID and Password then click LOGIN. (To learn how to setup User ID click here)
9)
Click to retrieve information on
Operating System, CPU, RAM, IP Address, Disk Space, etc.
10)
Instructions on 
can be found here. Click here
for 
.
Pan / Tilt
1)
Click 
to bring up the Pan/Tilt Controls.
2)
To use controls first choose
Pan/Tilt equipped camera by clicking display screen or camera indicator button.
3)
Up to 8 Preset Position can be
accessed.
4)
Preset Run (continuous cycle of preprogrammed positions) can
be turned on/off. (To learn how to
preset positions and set up the Preset Run click here)
5)
If equipped, Auto Focus,
Zoom, and Focus controls are also available.
6)
To adjust camera, use arrow
buttons on direction pad.
7)
Click Close to go back
to main menu.
Color
1)
From Main
Menu, click 
to bring up Color Controls.
2)
Choose camera channel to modify by clicking display screen
or camera indicator button.
3)
Adjust by moving slider with mouse.