Web Viewer
To connect to a DVR System from an outside source, open Internet
Explorer, type in IP Address in address bar.
(Note: If the
screen below does not come up, allow ActiveX to run by going to Tools, Internet
Options, Security, and Custom Level. On Run ActiveX controls and
plug-ins, check box for Enable or Prompt. Click OK, Yes, and OK
to exit. Refresh. If prompted to Do you
want to allow software such as ActiveX controls and plug-ins to run? Click Yes.)
1) MultiClient (Monitors up to 32 servers
simultaneously)
a)
Click 
and choose download path.
b)
Click 
to
download (1.50 Mb).
c)
Double click LdCliSetup and follow Install Wizard.
d)
Double click 
to open.
e)
Click 
f)
To add new site, click ADD then type in Site Name, IP
Address, ID, and Password. (Note: User
ID with Client access must be created in Setup
Password to gain access)
g)
Click CLOSE.
h)
Click LOGIN.
(Note: Majority of
functions are identical to DVR System described in the earlier sections. Particular features are described
below)
i)
View one or up to 4 sites at once.
j)
Use arrows to move from site to site.
k)
Indicates which site on screen the
sensor (
) or digital
output (
) is
linked to.
l)
Click 
to modify Video Accelerator. If computer used does not have a fast
video card, set accelerator to LOW. Set to HIGH for best viewing quality.
2) WebClient (Monitor one system at a time. Program download not required)
a)
Click 
and WebClient should start
automatically.
b)
Enter ID and Password. (Note: User ID with Client access must be created in Setup Password to gain access)
c)
Click LOGIN.
Previous Page Table of Contents Next
Page