Setup

Pan / Tilt

1) Choose camera channel by clicking

2) Assign PanTilt ID and ComPort (Computer port) number. (Note: Refer to PTZ camera’s user manual on how to set ID number on camera)

3) Select driver under Pan/Tilt driver setup. (Note: Refer to Camera’s manual for type of driver)

4) To invert control movement check Invert Pan and Invert Tilt boxes.

5) Use Pan/Tilt Display Screen and Pan/Tilt Control to redirect camera.

6) Press to create new or modify existing PTZ protocol.

7) To modify existing PTZ protocol, click to find .PTZ file. Click Load. Make changes. Click Save.

8) To create new .PTZ file, enter information and click Save.

9) To load, go back to Pan/Tilt screen and under Pan/Tilt driver setup, select PTZ protocol.

Previous Page Table of Contents Next Page